Thursday, March 3, 2011

Chassis Challenge

Welcome back!! We're back for yet another update. This time around, our update would be about Challenge 2: Chassis.

MEETING

Prior to the challenge day, where we're suppose to present our chassis design, obviously, there are meet-ups to complete what is supposed to be completed. This time around, the technical side of our team is more involved in this challenge.


Research are made to come up with an appropriate design where efficiency and safety is our team's main concern.

Books are referred as well as info seeking online.
"How ah?"

Coming up with a design...

Completing....

rest a while first

Almost there...

Basically, the whole completion of this challenge goes like this in chronological order:
  1. Basic sketch/draft

  2. Encountered some minor problem, went to ask around friends who are taking automotive degree in another institution. Managed to generate some idea as well as borrowed a book from friend, while researching online for more info.

  3. Finally a ideas came flowing. Sketching continues until a final draft agreed by everyone is drawn.

  4. Moving on to technical drawing such as braking, suspension, and steering system design.

  5. Preparation of slides for presentation.

  6. Due to insufficient time, the team only manage to come up with a 3D-view which is drawn manually.

  7. Presentation time at 9.00am!!

PRESENTATION DAY

The moment of truth. We sent Tan to be our presenter for the day.


Explaining the key for fuel efficiency.


Explaining the different types of idea adapted from different types of car for our chassis design. The types of car that we have adapted into our design are Smart ForTwo, Ariel Atom, Toyota IQ as well as the go kart as seen in the two pictures below.



Moving on, is the design specification as shown in the picture below.


Despite the hefty price, that is just our basic estimation according to market price inclusive of labor costs and what not. It could go cheaper but it is better to mark up the budget to be on the safe side.


Next! Is the chassis drawing. Due to insufficient time to draw it on AutoCad, or ProE, our team had it drawn on a drawing block.

In the above picture, the technical team is explaining about the drawings like where this particular type of metal is used as well as how to bond all the parts together.


Questions asked by fellow judges to clear their doubts.

Then, Tan explained about the seat to be fixed into the car


The last part of our team's presentation was about some basic explanation on our design's lighting which is a pretty minor part.

The presentation is then wrapped up with a final Q&A session by fellow judges.

Team EcoTech! Minus Wendy that is, who is the photographer for the day.

Final picture of the day:
The boys were having a minor discussion about ways to improvise the design while the other group is presentation as seen here. No, we did pay attention.

Wendy's note after the presentation:
From my UNBIASED point of view, I would say that my team did pretty well in this challenge. Mainly because the boys did enough homework to be able to explain well (presenting WITHOUT any paper/script) during the presentation. Also, it is because the boys have had hands on experience as well as having a wide knowledge on both technical and theoretical side. Kudos to you boys for doing a good job!

THE VERDICT
Today as of Friday, 4th of March 2011, we received an email announcing the winner for Challenge 2.

Boohoo! Guess who won?


Yup, you got that right. It's US. TEAM ECO-TECH.

Congratulations!! Good job boys! *throws confetti*

So right now, for Challenge 5, the rest of the teams are required to draw the chassis designed by our team in CAD. Modifications are allowed shall there be any flaws in the design and complete the tasks as mentioned in the email sent by Dr. Azree.

The following pictures are the design of our team that other teams are required to follow:


The top and side view

The front and rear view

Lastly, the frame.

In the near future, a brief description of our team's chassis design will be posted here in our blog. So if you're interested to know, do come and visit our blog soon =)

Once again, CONGRATULATIONS for winning Challenge 2.

No comments:

Post a Comment